DEXA Scan Results Explained: Reading Your Composition Report
How to read a DEXA body composition report in plain English: total and regional fat %, lean soft tissue mass, ALMI, and left-to-right limb symmetry.
On this page (5 sections)
Step off a gym bioimpedance scale with a 13% body fat reading, book your first clinical DEXA scan (dual-energy X-ray absorptiometry, or DXA), and you might walk out with a printout saying 17.5%.
“Having done DEXA scans alongside InBody and smart scale check-ins myself, DEXA is comfortably the peak for regional detail. Nothing else tells you down to the gram how much lean muscle sits in your left leg versus your right leg.”
The trade-off is practical: booking a clinic appointment and paying $100 to $250 out of pocket makes DEXA a periodic benchmark anchor rather than a weekly log.
Here is how a DEXA scan works, why it reads higher than gym scales, what each table on your printout means, and how to upload your DEXA report into Pelaris. (Note: This guide covers the athletic body composition pages of a DEXA printout only. Bone mineral density pages are clinical measurements to discuss with your doctor.)
How DEXA works (and why it reads higher than gym scales)
A DEXA scanner passes two low-dose fan-beam X-rays at different energy levels through your body from head to toe. Bone mineral, lean soft tissue, and fat mass absorb those X-ray energies at different ratios, letting the software separate your body into three compartments pixel by pixel across every limb and trunk region.
Why does DEXA routinely read 2 to 4 percentage points higher on body fat than an InBody machine, callipers, or a smart scale?
- It counts fat everywhere in the body. Callipers pinch subcutaneous fat at surface sites, and bioimpedance currents follow water-rich muscle pathways. DEXA scans the whole body, including deep intramuscular fat, essential lipid in bone marrow and nerves, and internal trunk fat.
- Different machines have their own baseline. Even between the two main clinical manufacturers (GE Lunar and Hologic), algorithms differ slightly. Comparing three DXA machines across the same 99 adults, Ramirez and colleagues (2026) found group mean body fat readings from 34.4% to 36.4%. And in Potter and colleagues’ (2022) study of 795 US Marines, DEXA read 3.4 percentage points higher on average than an InBody 770.
“If your DEXA reads 18% where your gym scale said 14.5%, nothing about your body changed in the car park. You simply switched to a stricter ruler that counts fat everywhere in the body.”
Keep that context in mind alongside our guide on why athletes shouldn’t chase a single body fat number.
Section by section: reading your DEXA body composition sheet
1. Total Body Summary: Total % Fat, Fat Mass, and Lean Mass
Near the top of your report sits a summary table with four core columns:
- Fat Mass (g or kg): Total adipose and essential lipid tissue across your body.
- Lean Mass (Lean Soft Tissue, g or kg): All non-fat, non-bone tissue, including skeletal muscle, organs, blood, and water. Gaining 2 kg of Lean Mass between two morning DEXA scans reflects predominantly new skeletal muscle.
- BMC (Bone Mineral Content, g): Dry mineral weight of your skeleton (usually 2.5 to 4.0 kg in adults), so the three compartments sum to Total Mass.
- Region %Fat vs Total %Fat: Total %Fat divides Fat Mass by Total Mass (Fat + Lean + Bone), whereas Tissue %Fat divides Fat Mass by soft tissue only (excluding bone). Total %Fat is the standard figure reported in sports science.
2. Regional Breakdown: Arms, Legs, Trunk, Android, and Gynoid
Below the total line, DEXA splits your body into regions defined by the International Society for Clinical Densitometry (ISCD) official positions (Hangartner et al., 2013):
| DEXA Region | What It Covers | Why Athletes Care |
|---|---|---|
| Left Arm & Right Arm | Shoulder joint line down to the fingertips | Tracks upper-body hypertrophy and flags left-vs-right pressing or pulling imbalances |
| Left Leg & Right Leg | Femoral neck (hip) down through the foot | Primary rehab and return-to-play metric after knee, hamstring, or Achilles injuries |
| Trunk | Neck line down to the pelvic cut, excluding arms | Shows central lean mass (lats, pecs, erectors, core) and central fat trend |
| Android Region | A horizontal band across the lower abdomen (waist) | Tracks central abdominal fat storage; closely parallels your waist-to-height ratio |
| Gynoid Region | A band across the hips and upper thighs | Tracks lower-body storage; DEXA divides Android %Fat by Gynoid %Fat as the A/G Ratio |
3. Appendicular Lean Mass Index (ALMI) and FFMI
Athletic DEXA reports also print two height-scaled muscle indices:
- Fat-Free Mass Index (FFMI, $\text{kg/m}^2$): Total fat-free mass (Lean Mass + BMC) divided by height in metres squared, formalised in athletes by Kouri and colleagues (1995).
- Appendicular Lean Mass Index (ALMI, $\text{kg/m}^2$): Lean soft tissue in your four limbs only (Left Arm + Right Arm + Left Leg + Right Leg) divided by height squared.
Because your trunk contains your digestive tract and organs—which fluctuate with food and fluid—your arms and legs give a cleaner read of contractile tissue. When ALMI climbs from one scan to the next, you built real limb muscle.
4. Limb Symmetry and Rehab Benchmarks
Compare the Lean Mass column for Left Leg vs Right Leg and Left Arm vs Right Arm. A 1% to 3% difference between dominant and non-dominant limbs is normal in kicking or throwing sports. A gap above 5% to 8% (common after ACL, ankle, or shoulder rehab) explains why bilateral lifts feel uneven and gives you a gram-exact benchmark to close with single-leg and single-arm work.
How to prepare so your DEXA scan is accurate
Water sits inside the Lean Soft Tissue compartment. As Nana and colleagues (2015) showed in Sports Medicine, a large meal, a litre of water, or glycogen-depleting exercise right before a DEXA scan shifts measured Lean Mass by up to 1 to 1.5 kg. Standardise your prep:
- Book a morning slot, fasted or after an identical light breakfast, and empty your bladder right before scanning.
- Arrive normally hydrated from the day before without chugging fluids in the final hour.
- Do not train before the scan so muscle glycogen and fluid sit at baseline.
- Wear thin activewear with zero metal (no zips, eyelets, or underwires).
- Return to the exact same clinic and scanner model for follow-up scans.
How to use your DEXA baseline inside Pelaris
Our team built Pelaris so a twice-yearly DEXA scan and fortnightly check-ins work together:
- Upload your DEXA PDF or photo into the Body tab. Pelaris extracts your weight, body fat percentage, fat mass, and lean mass for confirmation and pins them to your timeline on the scan date as a measured DEXA benchmark.
- Track fortnightly shape and range trends with two-photo scans. Between clinic visits, a 60-second two-photo check-in anchors your honest body fat range to your DEXA baseline and tracks your 3D Body Blueprint alongside your workouts.
What this means for your training
- Treat DEXA as a twice-yearly compass. Use it at the start of pre-season or end of a major block, with fortnightly photo or tape check-ins in between.
- Expect DEXA body fat % to read 2 to 4 points higher than gym scales. It counts internal and intramuscular fat that BIA and callipers miss.
- Watch ALMI and limb symmetry. Limb lean mass strips out gut water noise, and any left-to-right gap above 5% to 8% guides unilateral strength work.
- Standardise prep and upload your report. Scan fasted and rested on the same machine, then upload your DEXA report into Pelaris to anchor your coach and photo trends.
21.8
70.5 kg lean mass
82.9 kg
At 12% body fat, a rough guide
129.4 cm
Target shoulder tape
Trained Athletic Lean Mass (20.0 to 21.9). Casey Butt's frame formula gives about 73 kg of lean mass at 12% body fat for your wrist and ankle size. Treat it as a rough guide, not a limit: plenty of athletes sit above it.
A rough general fitness estimate. It is not a limit on what you can build and not a medical assessment.
The link carries the numbers you entered in the part of the address after the #, which is never sent to a server. Share it only with people you are happy to show those numbers to.
About these numbers: Formula, guard-rails & 3 peer-reviewed citations ▾
FFMI = Lean Mass (kg) ÷ Height (m)² · Normalised FFMI = FFMI + 6.1 × (1.80 − Height m) · V-Taper Target = 1.618 × Waist
FFMI was designed in 1995 to screen male athletes for steroid use, and it has not been validated as a general guide for women or for most other groups. Casey Butt’s frame formula comes from bodybuilder-era data. Treat both as rough general fitness estimates, never as a limit on what you can build, and never as a medical or body-composition assessment. Body fat percentage estimates are approximate too.
- • Fat-free mass index (FFMI) scales lean mass to height. This study used it to compare male athletes who did and did not use anabolic steroids, so it is a rough reference point rather than a target. [Source]
- • Waist-to-height ratio earns its place on your card, this review of 31 studies found it a sharper screening signal than BMI or waist alone. [Source]
- • We show BMI exactly as the World Health Organization defines it, using the same adult cut-offs public health uses worldwide. [Source]
General fitness and training estimates only, labelled EST. Not medical advice or a clinical diagnosis.